Hochiki FIRElink-NANO Manuel d'utilisateur télécharger pdf (Page 11)

FIRElink-NANO Air Sampling Detector – Installation and User Manual Page 11 of 21

9-5-0-425/ISS1/JUL10

In accordance with good wiring practice, keep cables and individual bared conductors as short as

possible while allowing stress-relieving cable forming. Power cables should be current-rated at 1A or

greater. RS-485 cable should be screened twisted pair, e.g. Belden 9841 24AWG.

*NOTE The factory default setting of DIL switch 7 is OFF, so that the detector can monitor a power

supply. If power supply monitoring and ClassiFire Override are not required, leave DIL switch 7

set to OFF and fit a wire link across the two terminals to prevent a Fault condition on power up.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 20 21

Pas de commentaire

Hochiki FIRElink-NANO Manuel d'utilisateur Page 11